EN 8 Round Bars
Your source for EN 8 Round Bars, Manufacturer and Supplier of the most qualitative range of EN 8 Round Bars
Look for EN 8 Round Bars at best price across industry.
Grand Metal Corporation is acknowledged as a manufacturer, exporter & suppliers of EN 8 Round Bars, available in a variety or grades, materials, and finishes, in metric and inch sizes. We have a full range available always, with unrivalled lead times, superior quality and exemplary customer service, leading EN 8 Round Bars. Our inventory in stainless EN 8 Round Bars Ranges Carbon Steel EN-8 Bars, Carbon Steel EN-8 Bright Bars, CS EN-8 Round Bars Suppliers. EN-8 Rods Manufacturer, EN-8 Carbon Steel Round Bar, Carbon Steel Round Bars
EN-8 Carbon Steel Round Bar, Carbon Steel Round Bar supplier,stockist, Exporter
Grand Metal Corporation carries a variety of EN 8 Round Bars and supply at Best suitable price.
Useful Information of EN 8 Round Bars
Features:
• Finding high suitability for forging industries, grill fencing and engineering component
• Available in both Metric and Imperial options
• Available in cut to size finish
• Bars produced using cold finishing process support with no/very little heat applied during entire operations
Chemical Composition
| Grade |
Ni |
C |
Si |
S |
Mn |
P |
Cr |
Mo |
| EN - 8 |
- |
.35 - .45 |
.10 - .35 |
.050 MAX |
.60 - 1.00 |
.050 MAX |
- |
- |
Mechanical Properties
| Max Stress |
700-850 n/mm 2 |
|
| Yield Stress |
465 n/mm 2 Min |
(up to 19mm LRS) |
| 0.2% Proof Stress |
450 n/mm 2 Min |
(up to 19mm LRS) |
| Elongation |
16% Min |
(12% if cold drawn) |
| Impact KCV |
28 Joules Min |
(up to 19mm LRS |
| Hardness |
201-255 Brinell |
|
Technical information
| |
C |
MN |
Si |
S |
P |
Cr |
Ni |
| EN-8 |
.35 - .45 |
.60 - 1.00 |
.10 - .35 |
.050 MAX |
.050 MAX |
- |
- |
| EN-8D |
.40 - .45 |
.70 - .90 |
.05 - .35 |
.060 MAX |
.060 MAX |
- |
- |
| EN-9 |
.50 - .60 |
.50 - .80 |
.05 - .35 |
.040 MAX |
.040 MAX |
- |
- |
| EN-15 |
.30 - .40 |
1.30 - 1.70 |
.10 - .35 |
.040 MAX |
.040 MAX |
- |
- |
| EN-16 |
.30 - .40 |
1.30 - 1.80 |
.10 - .35 |
0.04 |
0.04 |
- |
- |
| EN-18 |
.35 - .45 |
.60 - .95 |
.10 - .35 |
0.04 |
0.04 |
.85 - 1.15 |
- |
| EN-19 |
.35 - .45 |
.50 - .80 |
.10 - .35 |
0.04 |
0.04 |
.90 - 1.40 |
- |
| EN-24 |
.35 - .45 |
.45 - .70 |
.10 - .35 |
0.04 |
0.04 |
.90 - 1.40 |
1.30 - 1.80 |
| EN-25 |
.27 - .35 |
.50 - .70 |
.10 - .35 |
0.04 |
0.04 |
.50 - .80 |
2.30 - 2.80 |
| EN-31 |
.90 - 1.20 |
.30 - .75 |
.10 - .35 |
0.04 |
0.04 |
1.00 - 1.60 |
- |
| EN-36B |
.12 - .18 |
.30 - .60 |
.10 - .35 |
0.04 |
0.04 |
.60 - 1.10 |
3.00 - 3.75 |
| EN-36C |
.12 - .18 |
.30 - .60 |
.10 - .35 |
0.04 |
0.04 |
.60 - 1.10 |
3.00 - 3.75 |
| EN - 41B* |
.35 - .45 |
.60 MAX |
.10 - .45 |
0.04 |
0.04 |
1.50 - 1.80 |
.40 MAX |
| EN - 42 |
.70 - .85 |
.55 - .75 |
.10 - .40 |
0.04 |
0.04 |
- |
- |
| EN - 45A |
.55 - .65 |
.70 - 1.00 |
1.70 - 2.0 |
0.04 |
0.04 |
- |
- |
| EN - 47 |
.45 - .55 |
.50 - .80 |
.50 MAX |
0.04 |
0.04 |
.80 - 1.20 |
- |
| EN - 48A |
.50 - .60 |
.60 - .90 |
1.35 - 1.65 |
0.04 |
0.04 |
.55 - .85 |
- |
| EN - 353 |
.20 MAX |
.50 - 1.00 |
.35 MAX |
0.04 |
0.04 |
.75 - 1.25 |
1.00 - 1.50 |
| EN - 354 |
.20 MAX |
.50 - 1.00 |
.35 MAX |
0.04 |
0.04 |
.75 - 1.25 |
1.50 - 2.0 |
| 16Mncr5 |
.14 - .19 |
1.00 -1.30 |
.15 - .40 |
.035 MAX |
.035 MAX |
.80- 1.10 |
- |
| 20Mncr5 |
.17 - .22 |
1.10 - 1.40 |
.10 - .35 |
0.035 |
0.035 |
1.00 - 1.30 |
- |
| SAE - 4140 |
.38 - .43 |
.75 - 1.00 |
.20 - .35 |
0.035 |
0.035 |
.80 - 1.10 |
.15 - .25 |
| SAE - 4150 |
.48 - .53 |
.75 - 1.00 |
.20 - .35 |
0.04 |
0.04 |
.80- 1.10 |
- |
| SAE -4320 |
.17 - .22 |
.45 - .65 |
.15 - .35 |
.035 MAX |
.040 MAX |
.40 - .60 |
1.65 -2.00 |
| SAE -4340 |
.38- .43 |
.60 - .80 |
.15 - .35 |
.035 MAX |
.040 MAX |
.70 - .90 |
1.65 -2.00 |
| SAE - 8620 |
.18 - .23 |
.70 - .90 |
.20 - .35 |
0.04 |
0.04 |
.40 - .60 |
.40 - .70 |
| SAE - 52100 |
.95 1.10 |
.25 - .40 |
.20 - .35 |
0.025 |
0.025 |
1.30 - 1.60 |
- |
| A 182 F-22 |
.05-.15 |
.30 - .60 |
.50 MAX |
0.04 |
0.04 |
2.00 - 2.5 |
- |
| A 182 F-11 |
.05-.15 |
.30-.60 |
.50-1.00 |
0.03 |
0.03 |
1.00-1.50 |
- |
| A 182 F-12 |
.10-.20 |
.30-.80 |
.50 MAX |
0.04 |
0.04 |
.80-1.25 |
|
| A 182 F-5 |
.15 MAX |
.30-.60 |
.50 MAX |
0.03 |
0.03 |
4.0-6.0 |
|
| A 182 F-9 |
0.15 |
.30-.60 |
.50-1.00 |
0.03 |
0.03 |
8.0-10.0 |
- |
| A 182 F-91 |
.08-.12 |
.30-.60 |
.20-.50 |
0.01 |
0.02 |
8.0-9.5 |
0.4 |
| Additional Elements |
Cb-0.06-0.10, N-0.03-0.07, Al – 0.04 max. V – 0.18-0.25 |
| 15Mo3 |
0.28 |
0.60-0.90 |
0.15-0.35 |
0.045 |
0.045 |
- |
|
| 17crnimo6 |
.14 - .19 |
.40 - .60 |
.15 - .40 |
.035 MAX |
.035 MAX |
1.50- 1.80 |
1.40 - 1.70 |
| ASTM A-105 |
.35 MAX |
.60 - 1.05 |
.35 MAX |
.050 MAX |
.040 MAX |
- |
- |
| A 350 LF-2 |
.30 MAX |
.60 - 1.35 |
.15 - .30 |
.040 MAX |
.035 MAX |
- |
- |
Contact Grand Metal Corporation today for a best offer & competitive quotation…
Call: +91 98927 02393, 97690 58811
Email: grandmetalcorporation@gmail.com
